5Th Gen 4Runner Oil Change

5Th Gen 4Runner Oil Change. Failure to do so can lead to premature engine failure so think of it as extremely cheap insurance for your 4runner. The below maintenance schedule goes up to 30000 miles or 36 months (3 years).

Oil Change 5th Gen How To LOTS of PICS! Page 55 Toyota 4Runner from www.toyota-4runner.org

This is the oil weight toyota prescribes for. While it was draining, i replaced the oil filter. Clean fill bolt, replace crush washer, and tighten to 36 ftlbs.

Source: www.pinterest.com

I posted up a new diy page that walks through the process. In the v6 4runner, the oil filter is in the engine bay (figure 7) next to the oil filler spout, and really easy to change out.

Source: www.toyota-4runner.org

This will help the oil drain out easier and faster. I use only full synthetic oil and change every 10k.

Source: www.toyota-4runner.org

5th generation toyota 4runner oil change guide tools needed for the oil change. Remove drain bolt using the 24 mm socket.

Source: www.twisted4runner.com

The below maintenance schedule goes up to 30000 miles or 36 months (3 years). The following tutorial will provide a walkthrough to properly cycle and replace your transmission fluid to ensure a long service life.

Source: 4runnerfamily.com

Put the motivx tool oil filter wrench onto the bottom of the oil filter housing. Remove drain bolt using the 24 mm socket.

Source: 4runnerfamily.com

The following tutorial will provide a walkthrough to properly cycle and replace your transmission fluid to ensure a long service life. The bolts are 12mm, and there are 2 of them.

Source: trail4runner.com

Insert the 3/8″ drive socket extension into the square opening in the bottom of the filter wrench, and use a ratchet to remove the oil filter. The below maintenance schedule goes up to 30000 miles or 36 months (3 years).

Source: www.toyota-4runner.org

As long as you use full synthetic oil you should be good to go for every 10k. The below maintenance schedule goes up to 30000 miles or 36 months (3 years).

Source: 4runnerfamily.com

Insert the 3/8″ drive socket extension into the square opening in the bottom of the filter wrench, and use a ratchet to remove the oil filter. One simple way to extend the life of your 4runner is to change the oil at regular intervals.

Source: www.toyota-4runner.org

As long as you use full synthetic oil you should be good to go for every 10k. Get under there and locate the oil drain cover.

Source: www.toyota-4runner.org

With the cover removed, you will see the 14mm oil drain plug. I posted up a new diy page that walks through the process.

Source: 4runnerfamily.com

The oil took about 40 minutes to fully drain out. How to change the rear differential fluid in a 5th gen 4runner drive shaft:

Source: www.primagem.org

Insert the 3/8″ drive socket extension into the square opening in the bottom of the filter wrench, and use a ratchet to remove the oil filter. Get under there and locate the oil drain cover.

Source: www.toyota-4runner.org

Put the motivx tool oil filter wrench onto the bottom of the oil filter housing. I posted up a new diy page that walks through the process.

Source: www.youtube.com

Rear diff calls for 2.6 quarts. Put your drain pans in.

Source: www.toyota-4runner.org

Rear diff calls for 2.6 quarts. This is the oil weight toyota prescribes for.

Source: www.toyota-4runner.org

The general service intervals for the toyota 4runner are every 5000 miles or 6 months, with an oil change required every 10000 miles or 12 months — unless you put the 4runner under a lot of duress. 5th gen 4runner oil and oil filter change diy.

Source: www.toyota-4runner.org

How to change the rear differential fluid in a 5th gen 4runner drive shaft: Clean drain bolt, replace crush washer, and tighten to 36 ftlbs.

Source: www.toyota-4runner.org

The general service intervals for the toyota 4runner are every 5000 miles or 6 months, with an oil change required every 10000 miles or 12 months — unless you put the 4runner under a lot of duress. Clean drain bolt, replace crush washer, and tighten to 36 ftlbs.

Source: www.toyota-4runner.org

In this short video i show you how to do an oil change on a toyota 4runner. 5th gen 4runner oil and oil filter change diy.

I Have An '18 4Runner, Toyota Care Free Service For 2 Years/25K Miles Is Every 5K For An Oil Change.

There are a few more infrequent items — see below. I have a 5th gen with 160k. 5th gen 4runner oil and oil filter change diy.

There Are Hundreds Of Toyota 4Runner Oil Change Videos.

The center slot/tabs on the side of the oil filter wrench should be aligned over the “wings” on the filter housing. Rear diff calls for 2.6 quarts. In the v6 4runner, the oil filter is in the engine bay (figure 7) next to the oil filler spout, and really easy to change out.

5Th Generation Toyota 4Runner Oil Change Guide Tools Needed For The Oil Change.

This is the oil weight toyota prescribes for. With the cover removed, you will see the 14mm oil drain plug. Not a single issue and runs like a dream.

Insert The 3/8″ Drive Socket Extension Into The Square Opening In The Bottom Of The Filter Wrench, And Use A Ratchet To Remove The Oil Filter.

How to change the rear differential fluid in a 5th gen 4runner drive shaft: This engine was designed intelligently with quick repairs in. While it was draining, i replaced the oil filter.

I Use Only Full Synthetic Oil And Change Every 10K.

This will help the oil drain out easier and faster. Remove drain bolt using the 24 mm socket. Failure to do so can lead to premature engine failure so think of it as extremely cheap insurance for your 4runner.

Location:

Share :